7200 Polar Bear ~ San Antonio, TX 78238

TX Series

The Coliseum C110 is a high quality, weather resistant speaker, which features specially treated drivers in a rugged ABS plastic enclosure. It is well suited for many applications including commercial installations, home theaters, home stereos, reference monitors and personal stage monitors. The C110 is a bass reflex enclosure with a tuned port and a 5" woofer whose computer-optimized design gives improved bass performance over conventional 5" woofer enclosures. With a power rating of 40 Watts of continuous music power the C110 is accurate from 85 Hz to 19 kHz with an efficiency of 92 dB. The C110 features an internal 70V matching transformer, which allows multiple C110's to be connected together without danger of overloading the power amplifier due to impedance drop. The user has a choice of three sensitivity settings (10W, 20W, 30W or off) selected via a rotary switch located on the rear panel of the speaker, allowing convenient adjustment of the relative volumes of multiple interconnected cabinets.

 C110 - Black exterior finish

 C110W - White exterior finish

C110 Specifications:

Notes:

A wide variety of mounting options are available using the four integral screw-slots or the provided metal L-bracket which allows it to be angled up, down or sideways depending on the mounting orientation. The C110 is available in a low-reflectance black or white finish (C110W) with a matching, perforated metal grille and can be painted to match its surroundings.

The Coliseum C120 is a high-end, water resistant speaker featuring specially treated drivers and a sculpted ABS plastic enclosure. This compact speaker is ideally suited for many applications: commercial installations, home theatre, home stereo, mobile applications, reference monitor, personal stage monitor and can even be used outdoors. The C120 is a bass reflex enclosure with a tuned port and a 5" woofer, which provides improved bass performance over conventional 5" woofer enclosures. Removing the press-fit grille gives access to the eyeball tweeter, which can be swiveled to suit various listening positions. The C120 will handle 100 Watts of continuous music and is accurate from 75 Hz to over 19 kHz.

The C120 is designed to allow a multitude of mounting options including a 'press-fit' microphone stand mount, integral key hole screw-slots or the provided metal U-bracket which allows it to be angled up, down or sideways depending on the mounting orientation. The optional swivel mount (C120MOUNT) allows the C120 to be dropped through a ceiling or suspended from a wall in any number of angles and includes a safety wire for peace of mind. For maximum convenience in live or mobile applications, the back plate features push terminals and dual 1/4" inputs. The C120 is available in a low-reflectance black (C120) or white (C120W) finish with a matching, perforated metal grille and can be painted to match its surroundings.

 C120 - Black exterior finish

 C120W - White exterior finish

C120 Specifications:

Notes:

Also available is the C120/70. The integrated 70V 'matching transformer' allows multiple C120's to be connected together without danger of overloading the power amplifier due to impedance drop. The user has a choice of three sensitivity settings (6W, 12.5W, 25W or bypass) selected via a rotary switch located on the rear panel of the speaker, allowing convenient adjustment of the relative volumes of multiple interconnected cabinets.

Accessories:

	C120MOUNT	Optional swivel mount.
No Picture Available.	C120PLUG	Plastic 1/4" jack plug - keeps water out.

Resources:

Specifications

The Coliseum C130 is a compact loudspeaker in the 100-watt range with a 6 1/2-inch driver and 1 inch Mylar tweeter.

The trapezoidal shape makes the C130 ideal for install or array mounting in tight locations. Weather resistant plastic enclosure and Mylar components mean the C130 can be used indoors or outdoors, ideal for foyers, patio systems for music and paging systems. Shipped with a rugged proprietary U-bracket for wall or ceiling mounting, they may be the most versatile and cost-effective solution for small installations, or as a repeater or fill cabinet in larger venues.

The C130 is available either in an 8-ohm version, or as a 70-volt multi tapped transformer version designed for fixed installation systems (C130/70). The integrated 70-volt ‘matching transformer’ allows multiple C130/70’s to be connected together without danger of overloading the power amplifier due to impedance drop. The user has a choice of three sensitivity settings (6W, 12.5W, 25W or bypass). Black or white versions are available.

 C130 - Black exterior finish

 C130W - White exterior finish

C130 Specifications:

Accessories:

	C120MOUNT	Optional swivel mount for C120 or C130.
No Picture Available.	C120PLUG	Plastic 1/4" jack plug - keeps water out.

The integrated 70V 'matching transformer' allows multiple C170's to be connected together without danger of overloading the power amplifier due to impedance drop. The user has a choice of three sensitivity settings (6W, 12.5W, 25W or bypass) selected via a rotary switch located on the rear panel of the speaker, allowing convenient adjustment of the relative volumes of multiple interconnected cabinets. The C170 is based on the already popular C110, C120 and C130, which have a complete list of features that make them an extremely good value for fixed installations. The C170, is a compact 100-watt loudspeaker made from an ABS plastic enclosure with an 8-inch driver and 1 inch Mylar tweeter, and features both dual binding posts and 1/4" connectors for maximum versatility. The trapezoidal shape makes the C170 ideal for install or array mounting in tight locations. Shipped with a rugged proprietary U-bracket for wall or ceiling mounting, they are a very versatile and cost-effective solution where superior sonic quality is required for small installations, or as a repeater or fill cabinet in larger venues. An optional polemount adapter (C170ADAPT) is also available for applications where placing the C170 on a speaker stand is required. The C170 is also available in white as the C170W, for situations where a more discreet speaker is required.

 C170 - Black exterior finish

 C170W - White exterior finish

C170 Specifications:

	C170ADAPT	Optional external bolt on 1 3/8" speaker stand adaptor for C170 / C170P - for standard speaker stands.
No Picture Available.	C170ADAPT2	Optional external bolt on 5/8" mic stand adaptor for C170 / C170P - for standard microphone stands.

The compact 150-watt C190 is capable of delivering a full 70 to 20,000 Hz frequency response. This proven 8-inch woofer and horn design uses an injection molded 90 x 30 degree horn assembly with 1.4-inch titanium driver.

Yorkville’s ingenious self-resetting PTC™ high frequency protection circuit protects the high frequency components used in the C190. PTC™ offers serious advantages over protection schemes used in many loudspeaker cabinets. While always present in the signal path, remains inaudible until it becomes necessary for it to react, at which point it effectively reduces output to the horn, protecting it from damage due to excessive power input or signal distortion. Unlike a breaker it does not require a physical reset to allow signal back to the horn driver, and unlike a bulb or fuse, does not need to be replaced if the circuit is tripped, and the fuse is blown, making it the ideal high frequency protection scheme for an installation loudspeaker.

C190 - Black exterior finish

 C190W - White exterior finish

C190 Specifications:

C120P Specifications:

Notes:

The Coliseum C120P is a high-end installation speaker, featuring specially treated drivers and a sculpted ABS plastic enclosure. This compact powered speaker is ideally suited for many applications: commercial installations, home theatre, home stereo, mobile applications, reference monitor, personal stage monitor and can even be used outdoors.

Resources:

Manual

The C170P is a powered version of the C170, which is based on the already popular C110, C120 and C130, which have a complete list of features that make them an extremely good value for fixed installations. The C170P, is a compact 100 watt powered loudspeaker made from an ABS plastic enclosure with an 8-inch driver and 1-inch Mylar tweeter, and features 1/4" input and output connectors for maximum versatility. The trapezoidal shape makes the C170P ideal for install or array mounting in tight locations. Shipped with a rugged proprietary U-bracket for wall or ceiling mounting, they are a very versatile and cost-effective solution where superior sonic quality is required for small installations, or as a repeater or fill cabinet in larger venues. An optional polemount adapter (C170ADAPT) is also available for applications where placing the C170P on a speaker stand is required. Exclusive features to the C170P include a 1/4" input and auxiliary out, controls for Gain, Volume and Tone, with a switchable mic/line input sensitivity, switchable 115V/230V voltage and a power switch.

C170P Specifications:

Accessories:

	C170ADAPT	Optional external bolt on 1 3/8" speaker stand adaptor for C170 / C170P - for standard speaker stands.
No Picture Available.	C170ADAPT2	Optional external bolt on 5/8" mic stand adaptor for C170 / C170P - for standard microphone stands.

Resources:

Manual

The C140W is a narrow format waterproof 12-watt column speaker designed for any installation where a visually unobtrusive sound source is required.

Seven 2.5-inch wide band plastic cone speakers in an extruded aluminum cabinet make the C140W ideal for patios, pool decks, sports facilities or outdoor background music / paging systems. The C140W can be easily installed and driven by any 70-volt amplification system, including the Coliseum CA1 or CA1T.

C140W Specifications:

The C150W is a waterproof 40-watt column speaker designed for any indoor or outdoor installation where higher performance sound reinforcement is required for background music or paging system.

Four 6.5-inch wide band plastic cone speakers in an extruded aluminum cabinet make the C150W ideal for patios, pool decks, and sports facilities. The C150W can be easily installed and driven by any 70-volt amplification system, including the Coliseum CA1 or CA1T.

C150W Specifications:

Notes:

The C150W is shipped with mounting hardware and has built in 70-volt speaker taps at 10, 20 and 40 watts.

Designed to be installed outdoors year round the C180 is an all weather, all season PA horn ideal for both residential and commercial applications. These weatherproof, waterproof, high efficiency horns offer excellent frequency response making them ideal for year round installations in marine environments, athletic events, public safety alert, outdoor marketing, school yards, car lots, background music, absolutely any outdoor event requiring high quality sound in rain, snow or sun. The C180 is up to the challenge featuring a low reflectance gray plastic horn and is 70 Volt ready with wattage taps at 1, 3, 5, 10, 15 and 30 watts and comes ready to be installed with its own U-bracket.

C180 :

Ideal for any paging or background music system, the C160W is a 10-watt, 4-inch diameter flush mount-ceiling speaker designed specifically for quick and simple installation in office and retail environments. The C160W has built in 70-volt transformer and taps, and can operate at 2.5 watts, 5 or 10 watts. It also features an efficiency of 92dB (1 W/m) and a frequency response of 100 - 16kHz. Rugged ABS plastic construction in a ‘pot light’ format with an all metal grille make the C160W ideal for any drywall or tile drop ceiling mount application. The C160W can be easily installed and driven by any 70-volt amplification system, including the Coliseum CA1 or CA1T.

C160W Specifications:

The C165W is a 60-watt 6.5-inch high performance ceiling mount loudspeaker. Ideal for any background music or paging system where superior sound quality is a priority, this speaker is made for louder club or restaurant / retail environments. Featuring an innovative design and employing high quality materials, the C165W maintains excellent performance from a compact ceiling loudspeaker. The C165W contains a coaxial 6.5-inch woofer and 3/4-inch titanium coated tweeter. Built in 70-volt taps at 7.5, 15, 30 or 60-watt operation means that high fidelity full range sound can be achieved over an extremely wide coverage pattern area. Virtually any 70-volt amplification or paging system, including the Coliseum CA1 or CA1T can drive the C165W.

C165W Specifications:

The CM5/70 is a 25-watt 5-inch high performance ceiling mount loudspeaker. Ideal for any background music or paging system where superior sound quality is a priority, this speaker is made for louder club or restaurant / retail environments.

Built in 70-volt taps at 5, 10 or 20 watts as well as optional 8-ohm (25 watt) operation means that virtually any amplification or paging system, including the Coliseum CA1 or CA1T can drive the CM5/70.

CM5/70 Specifications:

Looking for a way to hide speakers in a room? Don't have space to put a speaker? The Coliseum WM5T in-wall, flush mount loudspeaker is your answer. This compact speaker is ideally suited for many applications: commercial installations, home theatre, or home stereo. Using the volume between wall studs as an enclosure, this bass reflex speaker has a 5" woofer and mylar dome tweeter that provide impressive bass, and clean, crisp high frequency response. Installation is a snap with the provided cutting/painting template, while press-fit grille hides all mounting holes to give the WM5T a very clean and finished look. All mounting hardware is also provided. The baffle is made of white ABS plastic with a matching, white, perforated metal grille. It can be easily painted to match its surroundings.

WM5T/70 Specifications:

The LT-70V is a rack-mountable transformer unit for use in situations where multiple transformer-equipped speakers need to be powered from one amplifier. The LT-70V's toroidial transformer has over 300 watts of capacity without the added weight of an iron core transformer.

LT70V :

Resources:

Manual

The MT70V is a transformer unit in an enclosed box that may be mounted inside of any non 70V cabinet where a conversion for an installation at 70V may be required. It is easily weatherproofed for situations where it can’t be mounted internally. The MT70V's toroidal transformer has power taps at 6, 12, 25, 50, 100 and 150 watts and features a barrier strip for ease of installation at all power tap levels.

MT70V :

Bishoppetty Lighting Sound & Video ~ 7200 Polar Bear ~ San Antonio, TX 78238